The cosmetics contain a large amount of solid powder, such as titanium powder, calcium carbonate, gas flow wear technology to manufacture high-grade pressure powder makeup manufacturing, can improve powder structure, greatly improve the performance of powder performance and product quality.The bearing is a very important part of the pulverizer. If the axis is in the problem, it will directly affect the normal operation and operation efficiency of the crusher, then one of the Today's gas flow crusher manufacturers Body Technology Co., Ltd., talk to everyone if the bearing of the airflow crusher has failed?
(1), 2 bearing housing is uneven, or the motor rotor and the pulverizer rotor are different from the rotor, which will cause the axis to an additional load, thereby causing the bearing overheating. This happens, there is a stop to troubleshoot the fault immediately to avoid early damage of the bearing.
(2), too much lubricating oil in the bearing, too little or aging is also the main reason for causing the bearing overheating, so, according to the use of the book request, please add the lubricating oil on time. Generally, lubrication is 70% -80% of the bearing space, excessive or too little is not conducive to bearing lubrication and heat
. Bearings extend its life.
(3), the bearing cover and the shaft are too tight, and the bonding and axis of the bearing is too tight or too loose. One, this problem occurs, in the operation of the pulverizer equipment, the sound of friction and obvious swing will occur. Remove the bearing should be downtime. Trim the wear area and re-assemble it as required.
ALPA powder technology has always adhered to the development concept of "we use the heart, only the airflow mill", adhering to the "quality first, service-oriented" concept, has been based on technological innovation, science and technology research and development As the cornerstone, constantly improve the efficiency and safety of the airflow pulverizer, and is committed to providing customers with safer, energy-saving, environmentally friendly airflow mill products, creating more value for customers, creating greater benefits for employees, for society Do more responsibility.
