Airflow milling is super finely pulverized by the active material, which can greatly reduce the dissolution temperature of the active, which is conducive to the retention and transdermal absorption of the activity. If the skin care products have an antibacterial, the incectapy is permeable, and it is necessary to dissolve 2 h at 80 ° C, and if ultrafine pulverization, it is only a few minutes at 80 ° C to dissolve, which greatly maintains antibacterial activity.The silica can be applied to all coatings. In the processing of silica, the pulverization is essential, and the fluid bed gas flow mill is required at this time. The device uses a high-speed airflow to drive the material, which makes the raw material particles and the particles are cut with each other, and the particles and the inner walls of the particles are hit by each other, so that the feedstock is double pulverized, improves the pulverization efficiency, and therefore, the fluidized bed gas flow pulverizer is almost In an instant, the raw material can be pulverized from the original dimension to the ultrafine powder state.
The fluidized bed airflow pulverizer for silica dilot powder has the following characteristics:
The principle characteristics of the lower pulverization region and discs of discs and ultrasonic airflows The characteristics of the machine have the same characteristics, making the powder added to the pulverizer are easily hit by gas flow, relatively fluidized beds have a high pulverization chance of hit models.
The upper part of the principle uses fluidized bed horizontal worm wheels forced grading, accurate cutting point, high efficiency, can control any different hardness raw materials.
During the pulverization process, since the upper worm gear is forced to grade, the thick material is deposited at the bottom of the pulverizer, and the concentration of the powder of the pulverized region is doubled from the disc air current pulverizer, so the model is more than the circle. The disc air pulverizer is more comminuted.
The material of the pulverization member is all from jade ceramic material, including the high rotation racemation impeller, is also all corundum ceramic materials. Make sure that the crushed material is high purity, no impurities pollution, and the whiteness of finished products is not affected.
According to the customer's process requirements, the raw material is selected for performance requirements such as raw material whiteness, transparency, particle hardness, hole contrast, which can process powder products that meet the particle size. When processing silica, the product is fine, and the fluidized bed airflow pulverizer for the Shandong Erfa is used for the preparation of silica. It has a very mature technology. And craftsmanship, after many practical casesThe gold fluidized bed airflow pulverizer has high precision, high efficiency, high stability, and has higher visibility in the industry.
ALPA powder technology has always adhered to the development concept of "we use the heart, only the airflow crusher", adhering to the "quality first, service-oriented" concept, It has been based on technological innovation, and technology is developing as cornerstone. It is constantly improving the efficiency and safety of gas flow crushers. It is committed to providing customers with safer, energy-saving, environmentally friendly airflow crusher products, and creates more value for customers. Employees create greater benefits and do more responsibility for society. <18um。它对粉碎物体进行粉碎时，在保证控制粒度的上限的同时，也能调节成品的中位径。对所需粉体产品的粒度分布(中位径)能做到人为控制。
