ALPA MQW Series Rare Earth Crusher Polishing Powder Special Equipment is aimed at the physical and chemical indicators of rare earth raw materials, a dedicated crushing equipment for targeted development and development, controlled from granularity to equipment operation, reflecting ALPA "Specialized" and "People-oriented" design concept. Through the previous formulation, the rare earth product can be directly online after the grading of the MQW series rare earth special equipment.
The core accessories of the airflow crusher have a lot, and these accessories are also easy to lose parts. Once they don't pay attention to overhaul, they will cause serious consequences, especially the airflow crusher spindle will cause discontinuation, and production loss cannot be It is estimated that the following small series will introduce the cause of the spindle breakage of the gas flow.
The cause of the main shaft of the airflow mill:
1, due to the work of the airflow pulverizer is long-term broken, grinding the ore, the mechanical impact will cause fatigue damage to the spindle If the long run is worn, the spindle surface will be worn, and the crack will be generated slightly.
2, excessive feedstock can cause overload operation of airflow pulverizer, the gas flow crusher needs to feed properly, each machine has limited workload, if the machine exceeds this limit, the load is running Among them, parts are easily damaged, affecting the overall life of the airflow pulverizer.
3, ore often mixed some waste metal, and these objects are weakened by electromagnets in the upper end of the tape, and the electromagnets are weak, and the metal properties of manganese-containing steel materials are added, and the electromagnets are added. It is impossible to exclude, resulting in inclusion of these materials in ore and mud into the airflow pulverizer, resulting in frequent iron, thus causing frequent impact on the spindle.
The above is the reason why the airflow crusher is easily damaged. When we use the airflow crushing machine, if you want to use it longer, try to ensure that its workload is within the scope of the machine, pay attention to it. Maintenance work, a good maintenance work can also help the machine's better use.
The new era creates new demand. As economic growth is gradually changed from the intensive environmental protection, each industry is facing unlimited opportunities and challenges. Among them, the AlPa Powder Technology, which is a typical representative of industrial powder, manufacturing enterprises, with new era - environmentally friendly powder equipment, boostEach line of transformation and upgrading, highlighting its own value while achieving cooperative partner green development.
