ALPA gas flow grinding closed negative pressure, low temperature crushing, high purity operation, no dust pollution, system discharge is less than 5 mg / m3. The pulverized chamber is equipped with an automatic slag device that automatically eliminates difficult particles and impurities in the material. The reunion material has a dispersion and dispersion. The air of the large flow means that cooling polishing can be used for thermal material processing, no deposition. Automation control, low noise, no dust pollution.Ultrafine pulverization technology is a high-tech processing technology that has developed at the end of the 20th century. It broke the bottleneck of the smashing industry, so that the comminuted industry rose a new step. The so-called ultra-fine pulverization refers to the technique of pulverizing large particulate materials to more than 300 mesh techniques by mechanical strength or fluid power, and also called cellbreading technology.
Airflow ultrafine pulverizer is a method of pulverizing, cold pulping, etc., which is completely different from the previous pure mechanical pulverization method. There is no local overheating during the pulverization process, even in low temperature states, fast speed, instant, and thus reserves the bioactive ingredient of the powder to facilitate the desired high quality product. . It is quite uniform due to the use of supersonic airflow. The setting of the grading system is strictly limited to large particles, and there is a super fine powder that avoids dissemination, obtains uniform particle size distribution, and largely increase the specific surface area of fine powder, which increases the adsorption, solubility, etc. Big. Features of the air flow ultrafine pulverizer
After the ultrafine pulverizer is pulverized, the ultra-fine powder of the near nano-fine particle size can generally be used directly in the production of formulations, and the conventional crushing product still requires some intermediate links to achieve The requirements for direct termination production are likely to cause waste of raw materials. Therefore, this technology is especially suitable for crushing of precious raw materials.
Ultrafine pulverization is carried out under a closed system, which avoids the surrounding environment of fine powder, and prevent dust pollution products in the air. Therefore, this technology is used in food and healthcare products, and the microbial content and dust are controlled.
1, high efficiency. The full use of spray can increase by 30% of the traditional airflow pulverizer, and the graded machine is designed with our company's patented technology, and the particle size ultra-narrow distribution is concentrated.
2, multi-purpose. For more use, it can be used as a grader as a crusher. Smooth grain size, finished product particle size is 1 ~ 74UArbitrary adjustment within the m range.
3, green environmental protection. Low temperature, no medium, guarantees the purity and physical and chemical properties of the product. The equipment runs no dust pollution in a negative pressure state.
4, the wear is small. "Airflow Crusher + High Precision Turbine Grade Machine" can be highly pure, ultra-narrow processing ultrafine powder, avoiding the wear of "the spray + horizontal grading machine", and "fluidized bed + horizontal classification machine "The wear of the grading portion is particularly suitable for ultrafine pulverization of high-hardness and high purity materials.
5, large output. When producing a product with ultra-narrow distribution, the finished product is more than one-fold more than the traditional, and the ordinary airflow pulverizer is more than 1 times.
6, intelligent. The device can achieve automatic control, simple operation, stable operation, and more intelligent.
The structure of the air flow ultrafine pulverizer
The airflow pulverizer consists of the following parts:
1, the host is a gas flow pulverity.
2, electromagnetic vibrating feeders and controllers, feeding to the host.
3, the collector is a bag, collecting the finished product, discharging the gas.
4, pressure gauges and pressure regulating valves: control and regulating pressure.
5, mounting backplane and pipe: The above parts are assembled on the bottom plate and constitute a crusher assembly.
6, air compressor: Provide a pressure gas source to the airflow pulverizer host.
7, filter: Air compressor pressure gas is filtered to moisture and dirt through the filter and then passed into the airflow pulverizer host.
For the next overseas expansion, the General Manager of the ALPA Powder Science and Technology said that Alpa Powder Technology is very clear and full of confidence. In the future, AlPa Powder Technology adheres to innovation, quality, service, and constructs "global sales" system to form a global competitive manufacturing enterprise.
