Airflow milling and operation: Before use, check whether all fasteners of the machine are tightened. Check that there is a hard debride in the machine pulverized chamber. Boot, confirm that the operation is normal, and the material is placed from the material port. When the discharge is running, it is strictly forbidden to extend the hand into the outlet of the discharge. The hierarchical impeller speed cannot exceed the specified value, otherwise the grading wheel is destroyed, the motor. The safety valve must be regularly verified.
Airflow pulverizer has a plenty of puzzles in medicine and chemical workers, but it is precisely because of this, crusher equipment has a very important role in actual operations, need to be extremely valued. It can be, generally, people only need to have three months of operations will have a very easy operation experience, many of us, we will use the best operator to use it. The ceramic lining pipe is made of high-tech production process - self-provisional high temperature clutch synthesis method. The tube consists of three layers of corundum ceramics, transition layer, and steel from the inner to the outside, and the ceramic layer is formed in a high temperature of 2,200 ° C (Al2O3) to form a strong bond through the transition layer with the steel pipe.
Airflow pulverizer generally said that it is directly connected to the pulverizer directly, so that the connection is very simple, fast, and easy to repair, it is commonly used in our current common connection. In the way, if there is no very good connection in the assembly, the overall vibration of the airflow milling machine will appear, and the damage to the body is very serious. If we cannot accurately, the operating equipment will appear. Damaged problem. There are many reasons for the vibration of the airflow pulverizer. We must always maintain a full-scale maintenance to ensure the stable operation of the air current crusher during processing.
1, the hammer installation error in maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
2, the difference between the two sets of hammers exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the corresponding two groups is less than 5 grams.
3, the individual hammer card is too tight, there is no open in operation. After the stop, turn the observation by hand, think of the way to turn the hammer flexible.
4. Other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds the limit or damage. It is generally used to replace new bearings to solve the problem.
7. The bottom angle fixing nut is not fixed or running. The solution is tightened.
The airflow pulverizer has a large amount of deep-cavity rotor structure optimized, and the material can be increased by more than 42%, which greatly enhances the production capacity. In addition, the discharge port has also been specially modified, and the granularity can be adjusted, which can better meet the needs of customers and market, so that they have stronger market adaptability.
ALPA experimental workshop equipment, 3 sets of test processing equipment, experimental center subtraction detection and laboratory instrument, granularity, whiteness, density, specific surface area, image, etc., can also provide small Try, trial, big trial or even 1: 1 feeding experiment, experimental content includes various comminuted, grading, plastic, dry, modification, delivery, ammagnetic, etc., provides reliable development, design, and manufacturing Safe.
