Industry news

Maintenance and maintenance points of traditional Chinese medicine ultrafine pulverizer

Reading Volume:    Date:2021-09-10

  Airflow milling for drugs, the drug particles after micronization mainly include: increase the specific surface area of ​​the powder powder, a more compact PSD (particle distribution size), more uniform size, better powder control characteristics ( Suspension, dispersion and absorption), more predictable powder properties, color consistency, gloss, opacity.

  What is the maintenance and maintenance points of Chinese medicine ultrafine pulverizer? Shandong Erfai Powder Technology Co., Ltd. is a separate explanation.

  Chinese medicine ultrafine pulverizer repair:

  1, first check the power outlet, plug, power cord is no oxygen offset, break, if you do not have a power test .2, when the motor is powered, it can be turned to rotate with a hand-to-pull wheel, that is, it can be determined that there is a capacity failure in the two start capacitances of the machine. In this case, there is generally only new products.

  3, another situation is that the power is not rotated, and an external force can be rotated, but a weak current sound is issued in the motor, which is caused by mild leakage of the activation capacitor. If the current is too large, the motor does not start at all, and it is determined to start the capacitor short circuit. In the absence of professional instruments, the capacitance can be removed first, and the two leads are inserted into the zero and fire tunnel of the mains, and then the two lead short circuit is discharged. If you can make a discharge spark and a sound of "" sound, this capacitor can be used; if the sparks and sound are weak, the capacity of the capacitance has decreased, and the new or add a small capacitor. If the capacitor has been damaged, it cannot be used, and it must be replaced with new products with the same size.

  Chinese medicine ultrafine pulverizer maintenance:

  This type of Chinese medicine ultrafine pulverizer is very good, and daily maintenance is more important.

  1, check whether the lubrication of the bearing is good. 2, check if all fasteners are fastened.

  3, check whether the transmission belt is properly installed and good, if the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to wipe it in time. 4, check whether the protective device is good, if the protective device is discovered, it should beTime exclude.

  5, check that there is an absence of material or other debris in the broken cavity, and if it is sometimes cleaned. 6, check whether the hydraulic starting machine head or the starting rod is returned, adjusting the gasket to be properly and compressed.

  ALPA powder technology has always adhered to the development concept of "we use the heart, only the airflow mill", adhering to the "quality first, service-oriented" concept, has been based on technological innovation, science and technology research and development As the cornerstone, constantly improve the efficiency and safety of the airflow pulverizer, and is committed to providing customers with safer, energy-saving, environmentally friendly airflow mill products, creating more value for customers, creating greater benefits for employees, for society Do more responsibility.

Home |  About us | Products | News | Cases | Contact us | Privacy policy