Inert gas protective gas flow milling circulating air cooling. Because the system is a closed circuit loop system, there are multiple moving parts inside the device, and a certain temperature is generated in the high speed movement, while the temperature is critical to safety in the machining. Therefore, a heat sink cooler is installed on the pipe, which can effectively reduce the safety hazard caused by the equipment for a long time or in high temperature environment.
Using airflow pulverizer processing, the average particle size of the material can reach 1-74 microns, and the particle size can be arbitrarily adjusted, and it is an indispensable processing equipment in the battery material industry. So, what extent is the airflow crushing machine? It has a relationship with the following factors:
1, the initial fineness of the raw material, our airflow pulverizer generally requires the feed to 50 mesh.2, related to the physical properties of the material, the fluidity in the material, the uniformity of the particles is related. Some materials are fluidity, high impurities, high solvent content, can be blocked in the production process, this time you need to use special equipment, not all materials can be pulverized with standard equipment can achieve crushing fineness. .
3, which is related to the pulverization pressure during the pulverization process, and some of the equipment feed pressure is greater than the pulverization pressure, and some of the equipment is larger than the feed pressure, and the specific material needs to be specifically designed.
4, it is related to the speed of the feeding speed, not all the material fluidity is very good, whether it is a screw feeding or vibrating feed, and the feed process is a very important factor, some are very fine. The material is very difficult, at this time, it is necessary to achieve the feed effect with a dedicated personalized configuration.
5, then there is a relationship with the optimization of the airflow pulverizer, a lot of airflow mill manufacturers, but the same material is different, even if it is the same manufacturer Different models of equipment are also different, but according to experience, the effect of relative pulverization is better than small effects.
6, there is a relationship with the skilled degree of operator, and some equipment is launched to be a small pressure operation, and some are the operation of direct one step.
The above can be seen that the fineness of the airflow pulverizer is not fixed, butIf it is adjusted, it is because of this, it will make it a well-favored processing equipment that can be used in various industries. It can meet the diverse needs of different users. Shandong Yerpa in the battery industry for many years, for the smashing, grading, and hying of battery raw materials. Scattered, plastic processes have rich experience and very mature response programs, and has higher visibility at home and abroad, welcome users to inquire, negotiate.
The powder equipment industry is an eternal industry coexisting with humans. Science and technology is an important factor in promoting the development of the powder equipment industry and important forces. ALPA powder technology gives full play to the company's research and development strength, relying on science and technology. Force, innovative design high-efficiency airflow crusher powder equipment breaks through technical barriers, successfully obtained national utility model patents. In the future, AlPA Powder Technology will produce more cleaner and discharged airflow powder powder equipment, further promotion to advocate energy-saving and emission reduction, improve the ecological environment.
