Airflow mill manufacturer introduces that gas flow mills are very common in some non-metal industries, because gas flow grinding can uniformly uniform, its particle size distribution is not only narrow, but also the surface of the particles is also very smooth. And the shape of the particles is also very uniform, and there will be no strange shape.
Mechanical ultrafine pulverizer used in industrial, more energy consumption, larger production, more fine particle size (10-50 microns), production and processing It is a matter of great role. Today, I will meet this mechanical ultrafine pulverizer, mainly about the safety operation of the mechanical ultrafine pulverizer, the specific content is as follows:
1. Check
Before use, should it be stable and stable in the machine foot of the pulverizer, whether the screw is locked, the filter is intact, etc., it can be launched after a comprehensive examination.
2. Start
Turn on the power switch. When the indicator lights up, the machine can be activated. At the same time, it is observed that the running current, as well as the operation, if any problem should be stopped immediately, then check and repair.
3. Feeding
After the mill is running normally, it can start the feed, the speed cannot be too fast, the amount is not too much, and the material should not be too large or thick.
4. Operation
(1) During the pulverizer, if there is an abnormality, it should be downturbed immediately, and then the maintenance is performed.
(2) After the material is smashed, it is loaded into the middle transfer bucket. After the barrel is full, cover the cover to prevent the material.
5. Cleaning
(1) Open the pulverizing feed portion, then clean the machine, pay attention to clean it.
(2) After the pulverizer is cleaned, it is dry to dry for the next use.
6. Safety Precautions
(1) The operator should wear labor protection products before the operation.
(2) When the machine is added, pay attention to safety.
(3) The machine is in the process of operation, if there is an abnormality, it should be closed immediately, and must not work with a disease.
(4) When the mechanical ultrafine pulverizer is not completely stopped, the machine cannot be disassembled for cleaning or overhaul.
Shandong Erpa is a professional production machinery ultrafine pulverizer, airflow pulverizer, airflow classifier, etc.The manufacturer is a production base with technical advantages in China. Please continue to pay attention to Shandong El Pie on the content of the mechanical ultrafine crusher.
Since the reform and opening up, China has adhered to the basic national policy of opening up to the outside world. Open the national door to engage in construction, and gradually form an external open pattern in the whole multi-level wide area. The relevant leaders of the state have also said: "Comprehensive development of the world's development trend, economic globalization is the trend of the era of irreversible." Shandong Alpa Powder Technology Co., Ltd. As a professional powder equipment manufacturing enterprise, the Dongfeng of the policy is formed. Sales network throughout the world, with a number of overseas companies, products are exported to Australia, South Africa, Indonesia, Arab, Thailand and other regions.
