Airflow milling is super finely pulverized by the active material, which can greatly reduce the dissolution temperature of the active, which is conducive to the retention and transdermal absorption of the activity. If the skin care products have an antibacterial, the incectapy is permeable, and it is necessary to dissolve 2 h at 80 ° C, and if ultrafine pulverization, it is only a few minutes at 80 ° C to dissolve, which greatly maintains antibacterial activity.
In addition to in the powder coating system, silica removed powder can be applied to all coatings. In the processing of silica, the pulverization is essential, and the fluid bed gas flow mill is required at this time. The device uses a high-speed airflow to drive the material, which makes the raw material particles and the particles are cut with each other, and the particles and the inner walls of the particles are hit by each other, so that the feedstock is double pulverized, improves the pulverization efficiency, and therefore, the fluidized bed gas flow pulverizer is almost In an instant, the raw material can be pulverized from the original dimension to the ultrafine powder state.
The fluidized bed airflow pulverizer for silica dilot powder has the following characteristics:
1. The principle characteristics of the lower pulverization region and the disc / aerospace air current pulverizer The characteristics are the same, so that the powder added to the pulverizer is easily hit by gas flow, relatively fluidized beds have a high pulverization chance of hit models.
2. The upper part of the principle is compulsory grading, the cutting point is accurate, the efficiency is high, and the raw material of any different hardness can be controlled.
3. During the pulverization process, since the upper worm gear is forced, the thick material is deposited in the bottom of the pulverizer, and the concentration of the powder of the powder is doubled from the disc air current pulverizer, so the model is more than the disc. The gas flow pulverizer is more comminuted.
4. The material of the crushing member is all from jade ceramic material, including the high rotation speed, the hierarchical impeller is also a corundum ceramic material. Make sure that the crushed material is high purity, no impurities pollution, and the whiteness of finished products is not affected.
5. According to the customer's process requirements, raw materials can be selected for performance requirements such as raw material whiteness, transparency, particle hardness, hole capacity, which can process powder products that meet the particle size.
6. When processing silica, the product fineness can be D100 <18um。它对粉碎物体进行粉碎时，在保证控制粒度的上限的同时，也能调节成品的中位径。对所需粉体产品的粒度分布(中位径)能做到人为控制。
The production of fluidized bed gas flow in Shandong Yeli is used for the preparation of silica. It has very mature technology and technology. After many practical cases, the Erfai fluidized bed airflow pulverizer has highAccuracy, high efficiency, high stability characteristics, have higher visibility in the industry.
Since the reform and opening up, China has adhered to the basic national policy of opening up to the outside world. Open the national door to engage in construction, and gradually form an external open pattern in the whole multi-level wide area. The relevant leaders of the state have also said: "Comprehensive development of the world's development trend, economic globalization is the trend of the era of irreversible." Shandong Alpa Powder Technology Co., Ltd. As a professional powder equipment manufacturing enterprise, the Dongfeng of the policy is formed. Sales network throughout the world, with a number of overseas companies, products are exported to Australia, South Africa, Indonesia, Arab, Thailand and other regions.
