In the 21st century, it is attracted by the sustained growth of market demand. my country's airflow grinding industry has continued to expand. The increasing capacity is increasingly serious, and the industry produces products are mainly low-end products, and the overall core competitiveness is weak. In the case where the demand growth is slow, the demand for high-tech gas flow in my country has risen rapidly, and the low-end capacity of low-end production capacity in the airflow mill is more prominent, and more technical levels will be Eliminate out.The high pulverization precision is the most significant feature of the airflow pulverizer, so the gas current pulverizer has played a focus on the process of ultrafine powder material. However, for the user, the airflow pulverizer often faces some sudden conditions during use, because people understand how to understand the airflow crusher, and do not know how to deal with, so the next small series lists a few
Q & A of airflow pulverizer, I hope to help everyone. 1. When the gas flow pulverizer is crushing the material, if there is a phenomenon of the outer spray?
If it is blown out, then it is definitely a problem with the pulverizer. The reason is that it may be that the branching wheel in the pulverizer is too much. It is also possible that there is a problem for balancing valves, such as the open angle is too large. So to make specific investigations, find out the real reasons to effectively solve it.
2. For cyclonic airflow pulverizer, how should it be correct and reasonable in lubrication?
The cyclone pulverizer in the air current pulverizer, its main requirement in lubrication is to use quality lubricants, and strictly follow the requirements, and use the normal operation method to perform its lubrication. Because this will affect the service life of the device, it is not a horse tiger.
3. High-speed mechanical impact mill and airflow pulverizer, what is the difference between them?
High-speed mechanical impact and airflow pulverizer is different from a certain extent. Because it is different because of the granularity section of the device. However, they have the same place, all of which have a crushing. So if you use it, it is possible to achieve energy savings.
4. Airflow pulverizer has a gas source, is there a requirement?
The answer is certain because the gas source is the driving force of the airflow pulverizer, so it has to pay attention. If it is compressed air, the pressure should be in 0.7-0.8MPa between and the pressure is stable. If there is a fluctuation, the fluctuation is not too large, otherwise it will affect the crushing effect and product quality.
In the past context of economic globalization, more and more foreign exchanges have become an inevitable trend in all walks of life. For AlPa powder, this communication is not only promoted. The exchange of information, and accelerated the pace of ALPA powder into internationalization.
