Graphite negative electrode material (graphite, artificial graphite, spherical graphite) Crusher special equipment, Shandong AlPa powder technology mainly consists of MQW airflow, FW airflow classification and CSM mechanical impact grinding series, targeting spherical graphite and artificial graphite characteristics Different, special pulverization grading equipment for custom manufacturing production. Products have: full-negative pressure design, high pulverization grading precision, particle size shaping, low energy consumption, small wear. It can be widely used in graphite (natural graphite, artificial graphite, spherical graphite) crushing and grading mass production.
Today, the airflow classifier manufacturers come to introduce some common sense of the airflow crusher, I hope to help everyone, let's take a look at it.
Airflow classifier adjustment and maintenance
1. It is strictly forbidden to collide, and it should be cleaned inside and outside for a long time, properly safeguarding to prevent rust.
2,0.6-12 mm Various sieves of different specifications. When replacing, the light surface is required.
3, the bearing periodically fills high-speed butter, check once in half a month, and find it in time, it should be replaced or repaired in time.
4, airflow classifier mainly damaged parts: flat teeth, round tooth, large, small grinding. Flat teeth and round tooth steel processed, dynamic balance, severe grinding, replacement, self-cultivation size, size, per piece of weight, no more than 1 gram, so as not to vibrate, bearing and machine.
5, the reason for the manufacturing is not working properly, users can contact the manufacturer directly, free warranty.
Airflow classification machine precautions
1, it is strictly forbidden to start, when the feed port is blocked, it is forbidden to feed the hand or wooden stick, and should be closed immediately . Work properly when work, if there is a half-humid material, it is recommended to dry, or reduce feeding.
2, the operator should stand on the side of the feeding port, the hand is prohibited from exiting the mouth, and the operation and the machine is not stopped without stopping the cover.
Airflow classifier machine maintenance and storage
When there is a shutdown job, the machine should be idled for a while, the filler in the package, and then shut down.
2, each oil absorbed hole should be refueling, and the bearing portion is cleaned every half year of the lithium-based grease.
3, often check the componentsThe fastening situation prevents it from slipping off, damaging the machine.
4, the machine should be removed when the machine should be removed, and the grease is filled with all rotating parts, stored in the storage of air drying, non-corrosive gas.
The above is the full content of some common sense about the airflow classifier, I hope to help everyone, please pay attention to the airflow crusher manufacturers.
To reduce customer pre-investment, reduce project investment risks, improve product competitiveness, and ALPA provides customers with processing services to meet customers' diversification needs. Can be processed by battery materials, environmentally friendly desulfurization, building materials and solid waste, non-metallic mines, pharmaceuticals, food / cosmetics / health products, fine chemicals, powder metallurgy, high-tech materials, and other materials.
